麻豆xfplay国产在线观看_亚洲AⅤ日韩久久久xyz_女生阴道被男生插在线观看_欧美精品一区二区三区在线视频_欲色a∨人人爽网站hd播放器_最新国产在线观看福利_100款不良网站进入窗口软件_农村乱淫视频免费_亚洲永久免费播放片app一_一级特大a黄片播放视频

For the increasingly mature insulating glass industry, the adhesive tape insulating glass is aging, and the slotted aluminum insulating glass has attracted more attention. The beautiful appearance has become people's favorite glass, otherwise its production process is still very good. After finishing, what are the specific features of the two-component gluing machine manufacturer will tell you:

1.用于粘合的墊片需要開槽的鋁中空玻璃組件：

1. Aluminum insulating glass assembly with slotted gasket for bonding:

帶槽鋁中空玻璃的生產環境要求較高，溫度應為10-30℃，相對濕度更好低于70%。 干燥劑應從正規制造商那里選擇合格的產品，以確保干燥劑的有效使用。 更好在打開后24小時內使用干燥劑。

The temperature should be 10-30 ℃ and the relative humidity should be lower than 70%. Desiccant should choose qualified products from regular manufacturers to ensure the effective use of desiccant. It is best to use desiccant within 24 hours of opening.

2.兩組分涂膠機墊片膠-密封

2. Two component gluing machine gasket glue - first seal

使用丁基橡膠作為密封件起到阻氣作用，使用聚硫橡膠或聚硅氧烷膠作為第二密封件，主要作用是附著力作用，其次是氣體阻隔作用。 實踐證明，單次通過中空玻璃的壽命只有5年左右，而二次通過中空玻璃的壽命可以達到20年甚40年以上。 因此，發展雙通道密封中空玻璃是大勢所趨。

Butyl rubber is used as the first seal to block the gas, while polysulfide rubber or polysiloxane rubber is used as the second seal. The main function is adhesion, followed by gas barrier. Practice has proved that the life span of single pass through insulating glass is only about 5 years, while that of secondary passing through insulating glass can reach 20 years or even more than 40 years. Therefore, the development of double channel sealed insulating glass is the general trend.

玻璃壓片和雙組份打膠機的應用：

Application of glass pressing machine and two-component gluing machine:

(1)將組合后的兩種玻璃成分送入壓力機中，使丁基膠均勻地粘結在玻璃和空間框架上，確保中空玻璃的總厚度，從而使兩塊玻璃片 成為“整合”。

(1) The combined two kinds of glass components are fed into the press, so that butyl rubber is uniformly bonded to the glass and space frame, so as to ensure the total thickness of the insulating glass, so that the two pieces of glass become "integration".

(2)墊片框架的外邊緣與玻璃邊緣之間的距離應為5-7mm。 用于涂覆第二密封膠。 膠水應沿一側均勻涂抹，以防止出現氣泡。 涂層后，刮擦玻璃表面殘留物。

(2) The distance between the outer edge of the gasket frame and the glass edge shall be 5-7mm. For applying a second sealant. Glue should be applied evenly along one side to prevent bubbles. After coating, scrape the residue on the glass surface.

3.中空玻璃的第二封口膠機，使用中空玻璃雙組份打膠機。

3. The second sealing glue machine of insulating glass uses insulating glass two-component gluing machine.

4.中空玻璃的放置：

4. Placement of insulating glass:

中空玻璃的正確放置也會影響中空玻璃的更終質量。 無論是在生產，運輸還是在現場存儲，，堆疊架的設計要求必須考慮中空玻璃的特性，并且堆疊架必須具有一定的傾斜度。

The correct placement of insulating glass will also affect the final quality of insulating glass. Whether in production, transportation or on-site storage, firstly, the characteristics of insulating glass must be considered in the design of stacking frame, and the stacking frame must have a certain inclination.

中空玻璃的生產過程非常簡單，關鍵是要查看所使用的配置設備，只有正確的設備才能更地工作。

The production process of insulating glass is very simple, the key is to check the configuration equipment used, only the correct equipment can work more efficiently.