中空玻璃充氬氣的質量控制
中空玻璃充入幾乎高標準干燥的氬氣是保證中空玻璃保溫、隔音、不結露、防止氧化、內部外部壓力平衡等優良品質的重要措施。中空玻璃內部充入的氬氣是用含量來衡量的。
Filling the insulating glass with almost high standard dry argon is an important measure to ensure the excellent quality of insulating glass, such as energy saving, heat preservation, sound insulation, non condensation, anti oxidation, internal and external pressure balance. The argon gas filled in the insulating glass is measured by the content.
不僅中空玻璃內部充入的氬氣含量要符合要求,中空玻璃內部充氣的氬氣能夠長期保持也是保證中空玻璃充氬氣質量的重要指標。在中空玻璃充氬氣的過程中很多企業,不能掌握中空玻璃充氬氣的工藝,有一些企業使用的中空玻璃充氬氣設備不合格,都會導致中空玻璃充氬氣的整體質量不達標。
Not only the content of argon filled in insulating glass should meet the requirements, but also the long-term maintenance of argon filled in insulating glass is an important index to ensure the quality of insulating glass filled with argon. In the process of insulating glass filled with argon, many enterprises can not master the process of insulating glass filled with argon, and some enterprises use unqualified insulating glass filled with argon equipment, which will lead to the overall quality of insulating glass filled with argon is not up to standard.
一.中空玻璃充氬氣的設備、工藝問題
1、 Equipment and technology of insulating glass filled with argon
有些中空玻璃充氬氣設備沒有實時測量、校準功能,導致有的中空玻璃充氬氣過程沒有實時測量或測量不準確。中空玻璃充氬氣裝置一旦出現了問題,就會導致中空玻璃充氣氬氣含量的不足。
Some insulating glass filled with argon equipment has no real-time measurement and calibration function, resulting in some insulating glass filled with argon process without real-time measurement or inaccurate measurement. Once there is a problem in the argon filling device of insulating glass, it will lead to the shortage of argon content in the insulating glass.
二.中空玻璃密封問題導致的氬氣流失
2、 Argon loss caused by sealing problem of insulating glass
中空玻璃只有很好的密封才能保證中空玻璃內部的氬氣在單位時間內的流失率。合格的中空玻璃氬氣滲漏率每年不超過1%,中空玻璃密封不合格會導致中空玻璃內部氬氣的加快流失,甚會在短時間內全部流失。所以一定要采用雙道密封、整體折彎的鋁框,用插角制作的中空玻璃的框時框的四個角一定要用丁基膠封堵,以保證中空玻璃的密封性能。
Only good sealing of insulating glass can ensure the loss rate of argon in unit time. The argon leakage rate of qualified insulating glass is less than 1% every year. The unqualified sealing of insulating glass will lead to the accelerated loss of argon in the insulating glass, or even all the argon in a short time. Therefore, double seal and overall bending aluminum frame must be used. When the hollow glass frame is made of inserted angle, the four corners of the frame must be sealed with butyl rubber to ensure the sealing performance of the hollow glass.
三.中空玻璃內部壓力與外部壓力不平衡導致的氬氣流失
3、 Argon loss caused by imbalance between internal pressure and external pressure of insulating glass
中空玻璃充氣設備的質量管理依然不規范,有很多中空玻璃充氬氣設備測量、控制質量不合格。例如,有些中空玻璃充氣設備生產廠家生產的在中空線線上快速充氬氣的中空玻璃充氬氣設備快速壓力平衡控制技術不過關,導致了中空玻璃內部與外部壓力不平衡,這樣就會造成中空玻璃中氬氣含量的下降,甚會導致短時間內氬氣全部流失。
The quality management of insulating glass filling equipment is still not standardized, and many insulating glass filling argon equipment measurement and control quality is unqualified. For example, the fast pressure balance control technology of some insulating glass filling equipment manufacturers' insulating glass filling equipment which can quickly fill argon on the air line is not up to standard, which leads to the imbalance of internal and external pressure of insulating glass, which will cause the decrease of argon content in insulating glass, and even lead to the loss of all argon in a short time.
上一篇:盤點PUR熱熔膠機更換膠水時的注意事項有哪些?
下一篇:雙組份打膠機使用操作流程